Replace the cartridge

To replace a new cartridge (plate), remove the top of the stamp by pulling upwards, press the stamp and the original plate falls out. Put the top of the stamp back on and insert the new stamp in place of the original one. Press the stamp down and the new plate will snap into place. I then recommend a few test impressions to get rid of the excess ink on the new plate. 

Adding ink to the stamp

The stamp contains quick-drying ink, which has a natural tendency to dry out. If it is not refilled regularly at least every 3 months, the stamp will dry out sooner or later.

Remove the top of the stamp by pulling upwards, press the stamp and the original plate will fall out. Just drop 2 drops into each hole for a total of 6 drops.

Put the top part of the stamp back on, put the plate in its original place. Press the stamp, this will hold the plate where it should be. I recommend a few test impressions to get rid of excess ink. 

Video tutorial

WARNING

Our products are made of high quality and durable material, contain no harmful substances, BPA or phthalates, the ink of the stamp is non-toxic. All our products meet all EU standards and are therefore suitable for children. However, keep in mind that stamps are not toys and should be applied by an adult or under adult supervision.